|
Code: VELCRO® Brand 0119 ADHESIVE Description: VELCRO® Brand 0119 ADHESIVE
A rubber-based, high performance, pressure sensitive adhesive specially formulated for polypropylene & polyethylene substrates.
0119 Adhesive readily adheres to plastics such as those used in display boards such as fluted plastic board. 0119 Adhesive is high
tack - quick setting, with an operating temperature range of -40°C to 85°C. Full bond strength can be obtained in 24 hours (80% in
about an hour).
0119 Adhesive high strength enables the product to be used across a wide variety of applications such as leg splints, wrist splints,
binders, prosthetics and much more. Sizes available are: 25mm and 50mm in 25 metre rolls. Colours available are black and white.
Available in White & Black
|
|
Code: VELCRO® Brand 0140 HEAT SOLVENT ACTIVATED Description: 0140 Adhesive is a non-tacky urethane pre-coat applied to the back of the tape. It is moisture resistant and ideal for
permanent bonding. 0140 is instantly activated by applying acetone or MEK (Methyl Ethyl Ketone).
This is best applied with a small brush to the back face of the tape to activate the adhesive. This product can be ultrasonically welded onto porous substrates. Operating temperature range from -40°C to 12°C and provides a permanent bond - suited for outdoor use. Sizes available are 25mm and 50mm in 22.8 metre rolls. Available colours are black and white. Recommended substrates are: ABS, Plywood-raw and lacquered, Painted wallboard, Polyethylene, Metals,
Polypropylene, Leather, and Acrylic
Available in Black & White
|
|
Code: VELCRO® Brand 0172 ADHESIVE Description: VELCRO® Brand 0172 ADHESIVE
A general purpose, pressure sensitive acrylic adhesive with superior bond strength and high temperature performance.
It is excellent on a wide range of substrates with very good adhesion on high-energy surfaces. 0172 can be used in automotive,
computer, medical and other markets. 0172 has moderate tack, achieving full bond strength in 24 hours. When cured, 0172 features
mild moisture resistance. Sizes available are 19mm, 25mm and 50mm in 25 metre rolls. Colours available are black, white and
beige. Special features include: Operating temperature range -28 º C to 107 º C, Acrylic based and pressure sensitive adhesive.
Ideal for: POS Displays, Signage, Automotive, Wall brackets, Computer housing, Sports equipment, Envelopes. For best results it
is advised that the surface should be clean, dry and free of oils. Use VELCRO® Brand clean wipe with isopropyl (rubbing alcohol) to
free surface of contaminates and allow to dry.
Available in White & Black
|
|
Code: VELCRO® Brand 0175 ADHESIVE Description: VELCRO® Brand 0175 ADHESIVE
This 0175 Adhesive is an acrylic high performance pressure sensitive adhesive applied to the back of the hook and loop
tapes and specially formulated for use on rigid and flexible vinyl products. Adhesive 0175 has a good resistance to plasticiser migration and a wide temperature operating range. -28°C to 110°C.
Sizes available are 25mm and 50mm metre rolls. Available colours are black and white. This adhesive is ideal for use in the automotive, camping and outdoor market. Adhesive has moderate tack, achieving full bond strength in 24 hours. Recommended substrates are: Vinyl-flexible, ABS, Aluminium, Glass, Vinyl-rigid, Acrylic, Painted steel and Polycarbonate
|
|
Code: VELCRO® Brand 8224 FIRE RETARDANT Description: Fire retardant pressure sensitive adhesives are suitable for use in applications requiring certification to industry specifications,
such as automotive, aviation and military. A rubber-based pressure sensitive adhesive formulated to meet Boeing Specification BMS
8-285. The High tack - quick setting adhesive achieves 80% bond strength in about an hour; full strength in 30 hours.
The temperate operating range -54°C to 71°C and is certified to BMS 8-285 60 second burn test for nylon hook and loop and 12 second burn test for polyester hook and loop. The 8224 Fire Retardant Adhesive can be manufactured to comply with: Federal Aviation Regulations
25.853(A), Motor Vehicle Safety. Standard FMVSS 302, Mil Spec AA 55126 B and AMTRAK Spec. No. GEN-S-014-001, Rev. B. Available in black in 19mm, 25mm and 50mm and beige 50mm.
|
|
Code: VELCRO® Brand ADHESIVE DOTS Description: VELCOIN® Brand pre-formed dots are handy for a multitude of uses. Their round shape prevents the edges from lifting and their easy peel and stick makes them ideal for smaller indoor fastening jobs.
The hook and loop components can be sold separately in multiple roll sizes or can be purchase in small consumer packs. Just apply some VELCOIN® Brand dots and some imagination to your smaller, fastening problems and you’ll have your perfect solution
|
|
Code: VELCRO® Brand BUCKLES Description: VELCRO® Brand buckles and hardware are manufactured to the highest quality specifications, ensuring high strength and trouble free operation.
VELCRO® Brand buckles come in an array of different sizes and shapes to suit your requirements. Ranging from locks and slides, buckles, shoulder pads, hooks, rings, cord locks, slide release buckles and slides.
VELCRO® Brand has the solution for you. Ideal for backpacks, portable lighting, luggage, boating
accessories and camping equipment.
|
|
Code: VELCRO® Brand FIRE RETARDANT SEW ON Description: VELCRO® Brand FIRE RETARDANT SEW ON
The VELCRO® Brand Fire Retardant tape is suitable for machine or hand sewing to almost any fabric or material; it is compliant with the Federal Aviation Regulation 25.853 flammability test making it is suitable for use in the aviation industry for aircraft and other environments that require the use of flame retardant fasteners.
It is also compatible with Motor Vehicle Safety Standard FMVSS 302, Mil –Spec. AA55126 Rev B and AMTRAK Spec. No GEN-S-014-001. Operating temperature ranges from -56º C to 93º C and sizes range from 20mm to 100mm in 25 metre rolls. Colours available are white, beige, olive green and navy.
|
|
Code: VELCRO® Brand MVA#8 Description: VELCRO® Brand MVA#8 Fasteners
MVA#8 hook provides an aggressive closure for applications where strength is needed. A moulded nylon “arrowhead” design with 180 hook elements per square inch. This fastener is excellent for indoor and outdoor use where extra holding power is needed.
Heavy Duty VELCRO® Brand fasteners stick to most surfaces, including plastic. These fasteners are water resistant and perform well over a broad temperature range. The plastic moulded hook and extra wide 2” closure offer strong, water-resistant holding power. Developed for applications requiring a more permanent fixing. It is ideal for: boating, marine, workshops, installing wall and ceiling panels, holding mats in place and holding up signs.
|
|
Code: VELCRO® Brand ONE-WRAP® TAPE Description: VELCRO® Brand ONE-WRAP® is a fastening system that features a polyethylene hook, flame laminated to a nylon loop.
Reusable and infinitely adjustable, VELCRO® Brand ONE-WRAP® tape can be used for any size circumference and easily cut to length. ONE-WRAP® is ideal for: Cord & cable control, organising draws, storage of stationery items, home and office computers, display & exhibitions and optical fibre cable management.
Available in the following colours.
Ties & Reusable Rolls: Brown, Black, White, Green, Red, Orange,Yellow, Royal Blue, Purple, Grey & Beige.
|
|
Code: VELCRO® Brand ONE-WRAP® TIES Description: VELCRO® Brand ONE-WRAP® TIES
VELCRO® Brand ONE-WRAP® is a fastening system that features a polyethylene hook, flame laminated to a nylon loop. Reusable and infinitely adjustable, VELCRO® Brand ONE-WRAP® tape can be used for any size circumference and easily cut to length. ONE-WRAP® is ideal for: Cord & cable control, home and office computers, display & exhibitions and optical fibre cable management.
Available in the following colours Brown, Black, White, Green, Red, Organge,Yellow, Royal Blue, Purple, Grey & Beige.
|
|
Code: VELCRO® Brand POLYESTER Description: Velcro Companies continues to be the original and premier manufacturer and innovator of hook and loop fasteners.
Around the world, companies depend on our fastening solutions for a wide range of business operations-including bundling produce, organising miles of network cables, building a trade show exhibit and keeping our homes and workplaces clean. No matter what the application, the Velcro Companies offer products that balance price, performance and reliability.
Turn to the Velcro Companies for innovative fastening solutions that allow for cutting-edge design and improved end-item performance. The result is an enhanced end-user experience and true competitive advantage. Whether you’re looking for a customised colour or the best hook and loop combination for extreme
weather conditions. VELCRO® Brand technology provides best-in-class performance backed by worldwide manufacturing and logistics organisation.
|
|
Code: VELCRO® Brand Sew On Fasteners Description: VELCRO® Brand Sew On Fasteners
VELCRO® Brand sew on hook is a heavy duty hook tape with over 300 hooks per square inch and has a high cycle life. This hook
utilises a heavier weight hook to maximize performance without minimizing cycle-life.
The perfect nylon fastener to sew on anyfabric by hand or machine, yet so adaptable that other methods of attachment, besides sewing, are possible. These include: Riveted
(e.g. to aluminium), Screwed (e.g. to steel), Nailed (e.g. to timber), Stapled (e.g. to cardboard), Rust & jam-free, it will out perform & outlast traditional fasteners, Operating temperature range from -56°C to 93°C.
VELCRO® Brand Sew On boast a wide range of
colours; Black, White, Beige, Light Grey, Slate Grey, Brown, Olive Green, Coachman Green, Yellow, Navy, Royal Blue, Red, Pink glow,
Green glow, Yellow glow and Orange glow. Sizes available are 16mm, 20mm and 25mm. All rolls come in 25
metres in either hook or loop with a customer cutting service available.
|
|
Code: VELCRO® Brand ULTRA-MATE® HTH Description: ULTRA-MATE® Brand High Technology Hook (HTH) products are engineered moulded hook fasteners which provide superior closure with a variety of loops. The result of years of research by Velcro Industries, ULTRA-MATE® products provide an unprecedented range of fastening performance characteristics. They are moulded hook fasteners engineered to provide superior closure with a variety of loops, and to meet specific performance characteristics in conjunction with a range of polymers, each of which provides it’s own distinctive features. As such, each HTH hook style differs from each other. Each has its own specific characteristics and advantages to better meet your specific
fastening requirements.
Hook Style 705: A moulded nylon hook which is similar to our “Sew On” product in its properties, but with the added
benefit of being low linting. Nylon hook, high cycle, low density and has a melting point of 173°C. Available in 25mm
and 50mm. Sew On 45.6 metres and Adhesive 22.8 metres.
Hook Style 711: Is a high density polyethylene moulded hook ideal on disposable items and can be gamma ray
sterilised, which is ideal for medical applications. Nylon hook, medium cycle, low cost and has a melting point
of 136°C. Available in 25mm and 50mm. Adhesive backed on 22.8 metres.
|